Welcome to International Sales & Marketing Group Products
Omni Puller 1 2 3 4 Omni Puller Shown with round bar stock. There are two Omni grip ranges available with simple finger adjustment: 3/16” to 2 1/2”; and 3/4” to 3” diameter. Omni Puller shown in operation, advancing round material to a programmmed location. Your CNC is now ready to start the next machining process. Omni Puller shown advancing square bar stock using all four fingers for maximum gripping force. The special four finger design enables the operator to use both two or four fingers when necessaary Omni Puller shown having advanced square bar stock for the purpose of parting off the finished piece.     5 6 7       Omni Puller shown gripping flat stock with two finger setting. The unique two finger standard feature makes it possible to pull flat stock, hexagonal material and various shapes. Omni Puller shown pulling small 3/16” diameter delicate brass stock. The sensitive four finger “Golden Touch” patented desgin enables the operator to work with various soft materials; bronze; aluminum; brass; plastic; and other exotic alloys. Omni Puller shown approaching small 3/16” diameter brass stock. Special Omni feature permits the user to perform work only 1/4” form your chuck or collet closure. A front view of the fingers of the Omni Puller.                           4 Finger Clamping Force lbs. 2 Fingers Equal One-Half The Clamping Force Omni Puller coolant / Air connection show above. The Omni Adapter is used in conjunction with external coolant or air supply. Activation requirements are min. 15 P.S.I. to max 80 P.S.I. Shown above are Omni Puller’s “golden” fingers are available in three different types of materials for various applications: hardened steel (50 RC); cold rolled milld steel; and soft aluminum fingers.   Two Omni grip ranges are available with a simple finger adjustment on the Omni Puller. Grip ranges are from 3/16” to 2 1/2” and 3/4” to 3” diameter. Fast, simple, safe and easy installation. Activation requirement - minimum 15 P.S.I. to maximum 80 P.S.I. either coolant or air. Compact design, requires minimal space on machine turret, enabling the operator to use the adjacent tool stations without interference. The Omni Puller is equipped with an adjustable relief valve to assure a finger release response, by deactivating pressure. You can locate the Omni Puller in any 360 degree position on your turret. This will minimize any interference inside your machine housing. The very simple, compact design has only five moving parts in the entire Omni Puller. With either a two or four finger setting, you can pull various material: round; square; hexagonal; and flat stocks. Every Omni Puller is individually serialized for maximum quality. The Omni Puller includes: 4 piece set of hardened steel fingers 50 RC; coolant / air adapter; 1” diameter mounting shank; operating instructions; and parts list. Made in USA One year warranty. All descriptions and specifications contained herein are accurate as of the publication date ISMG reserves the right to make changes without notification.

Products

International Sales and Marketing Group
5151 Oceanus Dr., Bldg. 110
Huntington Beach, CA 92649
Phone (714) 379-1380
Fax (714)379-1385
Toll free for USA, Canada & Mexico
(800) 575-2843

Home Page